An NC-controlled universal tool milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/340mm, table dimensions X/Y: 700mm/460mm, speed: 4000rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, spindle mount: SK40, drive power: 5.5kW. Machine dimensions X/Y/Z: approx. 2000mm/1400mm/1800mm, weight: approx. 1900kg, control: Dialog 4, including Heidenhain path control, machine vice, Repar2 FBB spray protection device, year of manufacture: 2016, documentation available. On-site inspection is possible.

Article number: 27-06-063 Manufacturer: Chip Anne, Lid Mint condition Custom-fit seat and paint finish in RAL according to customer requirements Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 1000x1000x200mm Weight: approx. 4kg suitable: FP2 & FP3 FP2 Active Digital FP3 Active Digital FP2 Infinitely variable FP3 Infinitely variable

x-travel: 300 mm Y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 m/min Spindle mount: SK 40 Swivel head +/-: 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Approx. space: 1.3 x 1.1 x 1.6 cm The machine comes from a training course and has been put into storage. It is possible that the z-axis is defective.

Article number: 07-07-091 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment ...

Article number: 07-07-090 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Table clamping surface: approx. 800x420mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment ...

Article number: 07-07-085 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1980 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 10-500mm/min Rapid traverses: approx. 1.5m/min Accessories • Vertical & horizontal milling equipment  Coolant Device New  Complete docu ...

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Article number: 07-07-181 Manufacturer: Lid Very good general condition Machine partially overhauled Delivery time: on request Year of construction: ca.1978 L x W x H: approx. 2000x1600x1900mm Weight: approx. 1500kg Digital display: 3-axis digital display SINO New Travel: X-axis: approx. 500mm Y-axis: approx. 300mm Z-axis: approx. 380mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Feeds & rapid traverses: in all 3 - axes Feed range: approx. 10 - 500 mm/min Rapid traverses: approx. 1.5 m/min Accessories  3-axis digital display SINO New  Vertical & horizontal milling device  Work light  Coolant facility  Com ...

Lid FP3 L Active Digital Travel: 800x350x400 mm Spindle speed: 50-2500 rpm  ...

• more information

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Transversal way of the table: 260 mm Vertical adjustment of the table: 50 mm Vertical adjustment of grinding head: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Height: 1500 mm Various accessories: Set  ...